Privacy (Routeless) Feature ----> Price based on size
Reduce light and ensure privacy by ordering your blinds with our Routeless Construction feature which places the route holes towards the back of the slats so when completely closed you eliminate the incoming light typical of standard routed horizontal blinds.

1-1/2" Decorative Tape ----> Price + 20%
Decorative, herringbone-textured cloth tape can add color to your blinds while reducing light and increasing privacy. This 1-1/2" cloth tape replaces the standard string ladder, covering the route holes.

• Minimum Width: 10"
• Maximum Width (single blind): 72"
• Minimum Height: 10"
• Maximum Height: 120"

• Sill depth req. for Shallow Mount: 1-1/8"
• Sill depth req. for Flush Mount: 3"
• Surface area for Outside Mount: 2-1/4"

• Kingwood-B Blinds are approximately 80% heavier than Basswood blinds. The slats are more flexible and require additional support with closer ladder spacing and shorter end-routes.

• Inside mount blinds – headrail and slats made 1/2" smaller than width ordered. Valance will be an 1/8" of an inch less than ordered width

• Outside mount blinds – headrail and slats made to exact width ordered. Valance will be 2" wider than ordered width

• Blinds less than 12" wide will have center wand tilter only - no lift control

• Blinds 12" wide to 13" wide will have center cord or wand tilter - no lift control

Routeless slats are less secure in the ladders than slats with lift cords running through the route holes. Slats may shift when blinds are lifted or tilted and may not settle back into position without adjustment. Handle with care.